ETSO Deviation

Deviate from ETSO-C112e, section 3.1.1 c., section 4.2 and Appendix 1 by using RTCA DO-181E in lieu of EUROCAE ED-73E

Deviate from ETSO-C199 A1, section 3.1.1 c. and Appendix A1.2.5 by using RTCA DO-260B w/ Corrigendum 1 in lieu of EUROCAE ED-102A w/ Corrigendum 1

Deviates from RTCA DO-227A by permitting an Open Circuit Voltage (OCV) increase of 6% during one test of the environmental test sequence instead of a 2% change allowed in section 2.4.4 Test samples and test sequencies for LiMnO2 cells and batteries.

Deviates from RTCA DO-227A by deleting the requirement and test for cell polarity reversal to fulfil the future RTCA DO-227B currently under evolution led by the RTCA SC-235 working group.

Deviates from ETSO-C145eA1 to use IS-GPS-200H instead of IS-GPS-200D, for the demodulation of GPS signals and signal processing, provided that some key features of IS-GPS-200H listed in this deviation request and only these are used.

Deviates from ETSO-C146eA1 to use IS-GPS-200H instead of IS-GPS-200D, for the demodulation of GPS signals and signal processing, provided that some key features of IS-GPS-200H listed in this deviation request and only these are used.

Deviates from ETSO C159d §3.1.1 by using RTCA DO262D dated April 2019 instead of EuroCAE ED-243 dated April, 2017.

Deviates from ETSO-C4c Section 3.1.2 to use EUROCAE/RTCA document ED-14/DO-160, with one of the applicable revisions stated in section 2.1 of CS-ETSO Subpart A, instead of as specified in SAE Document AS- 396B

Deviates from ETSO-C116a Appendix 1 paragraph 3.1.1.3. by permitting a moisture content of 10 μg/L of gas.

Deviates from RTCA DO-227 by permitting, for articles of LiFeS2 chemistry, a 5% change in Open Circuit Voltage during the temperature tests, if it remains less than 5% for the complete sequence and if it is shown to meet the 2% limit within 45 days

Deviates from ETSO-C142a by using RTCA DO-227A with a corrected testing pattern for battery humidity test instead of DO-227 modified by Appendix 1 of ETSO-C142a

Deviates from ETSO-C142a by using RTCA DO-227A with a corrected sequence for the end-item testing instead of DO-227 modified by Appendix 1 of ETSO-C142a.

Deviates from ETSO-C142a by using RTCA DO-227A, corrected to permit the use of an appropriate limiting voltage for the Cell Discharge Current Test, instead of DO-227 modified by Appendix 1 of ETSO-C142a